AWWA TO BEGIN WORKING ON 34 STANDARDS REVISIONS

AWWA TO BEGIN WORKING ON 34 STANDARDS REVISIONS

March 28, 2025

The AWWA Standards Program announces that work will soon begin on several standards. This notice also announces the intent to have the responsible standards committee, or subcommittee, begin the process of completing the next revised edition within the 5-year revision cycle set by the AWWA Standards Council and the American National Standards Institute.

This notice also allows interested parties an opportunity to provide comments for consideration, or to become involved in the standard revision process.

The list of standards and staff liaisons appear below. For more information or questions, please contact the staff liaison assigned to the standard by clicking on their name below to email them.

Jason Hrdlicka

Nathan Edman

Liz Ralph

Frank Kurtz

Paul Olson, Standards Sr. Manager

******************************************************************************************************************************************************************************************

AWWA B130     Membrane Bioreactor Systems – Jason

AWWA B302     Ammonium Sulfate – Nathan

AWWA B451     Poly (Diallyldimethyl-Ammonium Chloride) – Nathan

AWWA B502     Sodium Polyphosphate, Glassy (Sodium Hexametaphosphate) – Nathan

AWWA B503     Sodium Tripolyphosphate – Nathan

AWWA B507     Phosphoric Acid – Nathan

AWWA B511     Potassium Hydroxide – Nathan

AWWA B512     Sulfur Dioxide – Nathan

AWWA B550     Calcium Chloride – Nathan

AWWA B603     Permanganates – Nathan

AWWA C111/A21.11     Rubber-Gasket Joints for Ductile-Iron Pressure Pipe and Fittings – Jason

AWWA C150/A21.50     Thickness Design of Ductile-Iron Pipe  – Jason

AWWA C151/A21.51     Ductile-Iron Pipe, Centrifugally Cast – Jason

AWWA C200     Steel Water Pipe, 6 In. (150 mm) and Larger – Liz

AWWA C206     Field Welding of Steel Water Pipe – Liz

AWWA C207     Steel Pipe Flanges for Waterworks Service, Sizes 4 In. Through 144 In. (100 mm Through 3,600 mm) – Liz

AWWA C217     Microcrystalline Wax and Petrolatum Tape Coating Systems for Steel Water Pipe and Fittings – Liz

AWWA C218     Liquid Coatings for Aboveground Steel Water Pipe and Fittings – Liz

AWWA C219     Bolted Sleeve-Type Couplings for Plain-End Pipe – Liz

AWWA C220     Stainless-Steel, Pipe, 1/2 In. (13 mm) and Larger – Liz

AWWA C504     Rubber-Seated Butterfly Valves – Jason

AWWA C507     Ball Valves, 4 In. Through 60 In. (100 mm Through 1,500 mm) – Jason

AWWA C509     Resilient- Seated Gate Valves for Water Supply Service – Amanda

AWWA C521     Plastic Ball Valves – Jason

AWWA C600     Installation of Ductile-Iron Mains and Their Appurtenances – Jason

AWWA C602     Cement-Mortar Lining of Water Pipelines in Place – 4 In. (100 mm) and Larger – Liz

AWWA C651     Disinfecting Water Mains – Amanda

AWWA C750     Transit-Time Flowmeters in Full Closed Conduits – Frank

AWWA C751     Magnetic Inductive Flowmeters – Frank

AWWA C907     Injection-Molded Polyvinyl Chloride (PVC) Pressure Fittings, 4 In. Through 12 In. (100 mm Through 300 mm) – Jason

AWWA D104     Automatically Controlled, Impressed-Current Cathodic Protection for the Interior Submerged Surfaces of Steel Water Storage Tanks – Frank

AWWA E102     Submersible Vertical Turbine Pumps – Jason

AWWA E200     Progressive Cavity Chemical Metering Pumps – Jason

AWWA G410     Business Practices for Operation and Management – Paul